Materials Needed:
* 1.5m of Quilted Batting Fabric
* 1.5m of Holiday fabric
* 2m of Braided edging
* Thread
* Rotary Cutter and cutting mat
* Iron and ironing board
* Pins
The amount of fabric I purchased was enough to make two table runners and 4 place mats in the end.
#step 1: prepare fabric
measure the desired length of your table runner by measuring the length of your table. Mine was about 6ft in length and I shortened up the width to 22"
Using your rotary cutter and cutting mat, trim your fabric to the desired length and widths.
#step 2: prepare to sew
place your Quilted Batting fabric on a even surface, then place the Holiday Fabric with right-side facing down on the quilted batting fabric. Pin into place, leaving a 4" opening along one of your edges to turn the table runner right-side out.
#step 3: sew together
sew along your three edges, leaving the 4" gap along one edge.
turn the table runner right-side out, lay flat and pin the 4" gap closed to sew along this edge
#step 4: finish with Braided edging
Take your Braided edging and pin into place along the edges of your table runner. Sew into place for a nice finish.
Et voila! You're all done!
 |
| Happy Holidays |
 |
| Festive Candle Holders and Table Runner |
 |
| It's Beginning to Look a Lot like Christmas |
Happy #sewing!
<3 awaLL
